How to Descale Your Breville Coffee Machine






image for how to descale breville coffee machine

If you’re a coffee lover, chances are you rely heavily on your coffee machine to fuel your day. But over time, your machine can accumulate mineral deposits and limescale buildup, causing it to operate less efficiently and produce a less enjoyable cup of coffee. That’s where descaling comes in. Descaling is the process of removing these deposits and buildup from your coffee machine, and it’s an essential part of machine maintenance. In this guide, we’ll walk you through how to descale your Breville coffee machine step-by-step, so you can keep enjoying delicious coffee at home for years to come.

Table of Contents

Understanding Limescale Buildup in Your Breville Coffee Machine

If you’re a coffee lover, then you know that a good cup of coffee can make or break your day. However, if your coffee machine is not working properly, it can ruin the entire experience. One of the main issues that arise with coffee machines is limescale buildup. In this article, we will discuss what limescale buildup is and how to prevent it from affecting your Breville coffee machine.

What Is Limescale?

Limescale is a hard white deposit that builds up in appliances such as kettles and coffee machines due to mineral deposits present in water. When water evaporates from these appliances, the minerals are left behind and form a crusty layer on surfaces over time.

Why Does Limescale Build Up In Your Coffee Machine?

Limestone buildup occurs when hard water passes through pipes or exposed surfaces made of metal or plastic leaving behind mineral deposits. In most cases, this would cause damage to your appliance leading to reduced performance and efficiency over time.

In terms of your Breville coffee machine specifically, there are some critical areas where limescale build-up could occur:

  • The heating element: This component heats up water for brewing.
  • The showerhead: It dispenses hot water into the basket holding ground coffee.
  • The steam wand: This part adds steamed milk to create cappuccinos or lattes
  • The internal tubing systems

When these components become coated with limescale deposits over time they will start malfunctioning causing decreased performance.

How Can You Tell If There Is Lime Scale Build-Up On Your Breville Coffee Machine?

So how do you know if lime scale has affected your appliance? There are several signs to look out for including:

  • Reduced flow rate
  • Increased brewing time
  • A decrease in temperature
  • Poor quality taste because of coffee extraction problems

If you notice any of these symptoms, it is time to descale your machine.

How Often Should You Descale Your Breville Coffee Machine?

The frequency of descaling your Breville coffee machine depends on several factors such as the type of water used, how often the appliance is used and whether you live in a hard water area. It’s important to note that some filters can reduce limescale buildup but it’s not always effective.

It is generally recommended that you descale your Breville coffee machine once every three months or after making 200 cups of coffee. However, if you start experiencing any of the symptoms mentioned above before this timeline, then it might be time for a deep cleaning.

Gathering the Necessary Tools and Materials for Descaling

Before you start descaling your Breville coffee machine, it’s important to gather all the necessary tools and materials. Here is a list of what you will need:

Descaling is a crucial part of maintaining your Breville coffee machine, as limescale can affect its efficiency and taste quality. Using white vinegar or a descaling solution combined with water, you can remove mineral deposits in the heating element, showerhead, steam wand, and internal tubing systems. Regular descaling is recommended every three months or after making 200 cups of coffee, depending on water quality and usage. Post-descaling maintenance includes cleaning and checking removable parts, inspecting O-rings, and replacing worn-out parts like water filters and showerheads. Always follow the manufacturer’s instructions and avoid using alternative cleaning agents.

White Vinegar or Descaling Solution

The first thing you need is either white vinegar or a descaling solution. Both options are effective at removing limescale buildup in your appliance, but each has its unique advantages.

  • White vinegar: This is a budget-friendly option that can be easily found in most supermarkets. It’s also an excellent natural cleaning agent that can help remove stubborn stains.
  • Descaling solution: This product is specifically designed to clean coffee machines and other appliances with limescale buildup. While it may be more expensive than white vinegar, it’s often more effective at removing deposits without damaging your machine.


You will also need water to dilute the descaling solution or white vinegar before using them on your coffee machine.

A Measuring Cup or Container

To ensure the right amount of water and cleaning agent mixture for descaling, use a measuring cup or container that can hold up to 1 liter of liquid.

A Clean Cloth

Lastly, get yourself a clean cloth that will be used for wiping down all parts of your Breville Coffee Maker during cleaning.

Preparing Your Coffee Machine for Descale Cleaning

Before starting the actual process, there are some things you should do first:

Regular descaling is essential to maintain the performance and lifespan of your Breville coffee machine. Limescale buildup can affect the quality and taste of your coffee and even damage internal components like heating elements and tubing systems. Gathering the necessary tools and materials, properly preparing your appliance, and following the manufacturer’s instructions are crucial to ensuring a successful descaling process. After descaling, it’s important to maintain and clean your coffee machine regularly to prevent further buildup and damage. Avoid common mistakes like using the wrong amount of cleaning solution, not rinsing properly, neglecting internal components, using alternative cleaning agents, rushing the descaling process, and not following manufacturer instructions.

Read The Manufacturer’s Manual

Refer to the manufacturer’s manual first before starting any procedure so that you don’t miss any crucial information about caring for your Breville Coffee Maker.

Empty Your Coffee Machine Of Any Remaining Water Or Coffee Residue

Empty any remaining water from the reservoir and remove any residue left in both portafilters (single/double) by rinsing them with warm water then set them aside until they dry completely.

Remove Any Removable Parts

Remove any removable parts that can be affected by the cleaning process, including the water filter and drip trays. Check your manual to identify other removable parts.

Clean The External Surfaces Of Your Coffee Maker

Use a clean damp cloth to wipe down all external surfaces of your coffee machine, ensuring they are free from dirt or debris.

Step-by-Step Guide to Descaling Your Breville Coffee Machine

Descaling your Breville coffee machine is a simple process that can be done at home. Here are some step-by-step instructions on how to descale:

Descaling is a crucial process in maintaining your Breville coffee machine and ensuring it produces delicious coffee for years to come. Limescale buildup in your appliance can cause reduced performance and efficiency, but it can be solved by removing mineral deposits through descaling. Using either white vinegar or a descaling solution and following the manufacturer’s instructions for correct mixtures, you can run the solution through your machine by filling the reservoir with the mixture, letting it run, and then rinsing it multiple times with clean water. After descaling, it is essential to perform regular maintenance checks, such as cleaning removable parts and performing checks on the water filter, O-rings, and showerhead.

Preparing the Descaling Solution

If you’re using a commercial descaling solution, read the manufacturer’s instructions for mixing and diluting it with water. If you’re using white vinegar as your cleaning agent, follow these steps:

  • Mix equal parts (1:1) of white vinegar and water in a measuring cup or container.
  • For larger machines, use 2 cups of white vinegar and 2 cups of water.

Running the Descaling Solution through Your Machine

Once you have prepared your cleaning solution, it’s time to run it through your Breville coffee machine. Follow these steps:

For Machines with Manual Controls

  • Fill the machine’s reservoir with the cleaning solution mixture.
  • Turn on the machine and let it run until half of its contents dispense into a cup or container.
  • Turn off your appliance and wait for about 15 minutes before turning it back on again.
  • Letting warm soapy water pass through every part of internal tubing system is essential because this removes any remaining mineral deposits in places no other cleaner can reach
  • Repeat this process until there’s no more cleaning mixture left in the reservoir.

For Machines With Automatic Controls

  • Fill up both tanks (water tank & Bean Hopper) with clean fresh cold water
  • Add one sachet or single-use bottle designed specifically for descaling your Breville Coffee Maker into each tank
  • Start by running hot water from steam wand followed by hot milk then rinse dispensing spout
  • Select “Clean Me” from Cleaning Menu if available
  • Start cycle according to manufacturer’s instructions

Rinsing Your Machine

After running the descaling solution through your Breville coffee machine, it’s time to rinse everything thoroughly. Follow these steps:

  • Fill your appliance’s reservoir with clean water.
  • Let the machine run until all of the water has been dispensed into a cup or container.
  • Repeat this process a few times until there is no vinegar or descaling solution left in your appliance.

Cleaning Removable Parts

Don’t forget to clean any removable parts that you took out before starting the cleaning process. Clean them with warm soapy water and wipe them down thoroughly before putting them back in place.

Running Another Cycle

Before using your Breville coffee machine again, run another cycle of plain water through it to ensure that all traces of vinegar or descaling solution have been removed from the plumbing system.

Post-Descaling Maintenance and Cleaning of Your Breville Coffee Machine

After descaling your Breville coffee machine, it’s essential to maintain it properly to ensure that it stays in good condition. Here are some tips for post-descaling maintenance and cleaning:

Descaling your Breville coffee machine is essential for removing limescale buildup that can affect your machine’s performance. It is recommended to descale your machine every three months or after making 200 cups of coffee. You can use white vinegar or a descaling solution to clean your appliance thoroughly. After descaling, it’s crucial to rinse everything thoroughly and perform regular maintenance checks to keep your machine in good condition. Always follow manufacturer instructions, avoid using alternative cleaning agents, and take your time to avoid costly mistakes.

Cleaning the Reservoir

One of the easiest ways to maintain your coffee maker is by cleaning its reservoir regularly. This will help prevent any buildup of minerals or debris that could affect your machine’s performance.

  • Empty the reservoir and remove any remaining water.
  • Clean it with warm soapy water using a soft sponge or cloth.
  • Rinse thoroughly with clean water, dry completely before putting back in place.

Wiping Down External Surfaces

To keep your appliance looking new and shiny, wipe down external surfaces often. Use a damp cloth or sponge to remove any dirt or residue from the surface.

Cleaning The Portafilter

Cleaning the portafilter is essential for maintaining good quality coffee extraction as well as extending its lifespan. Follow these steps:

  • Remove any remaining ground coffee.
  • Rinse with hot soapy water then rinse again with clean cold running water
  • Dry completely before storing

Proper Storage

Storing your Breville coffee machine correctly is also crucial in maintaining its performance over time. Here are some guidelines on how to store it properly:

  • Store your appliance in a cool, dry place.
  • Always unplug power cord from electrical outlet when not in use
  • Covering up when not in use keeps out dust which can damage sensitive parts like heating element & grinder motor after prolonged exposure

Regular Maintenance Checks

Performing regular maintenance checks on your Breville coffee machine can help identify problems early enough before they worsen into costly repairs.

  • Inspect O-rings every 3 months
  • Check Water Filter every 6 months
  • Descale Every 3 Months

### Replacing Parts

Lastly, some parts of your Breville coffee machine may need to be replaced after prolonged use. Here are some parts that you should check and replace if necessary:

  • Water filter: This part needs to be replaced every three to six months, depending on usage and water quality.
  • Showerhead: If you notice that the water flow rate is reduced or uneven, it’s time to clean or replace the showerhead.
  • O-rings: These rubber seals can wear out over time and cause leaks or reduced performance.

Common Mistakes to Avoid While Descaling Your Breville Coffee Machine

While descaling your Breville coffee machine is a simple process, there are some common mistakes you should avoid. Here are some of them:

Using the Wrong Amount of Cleaning Solution

Using too much or too little cleaning solution can affect the effectiveness of the descaling process. If you use too much cleaner, it could damage your appliance’s internal components leading to costly repairs. On the other hand, if you use too little cleaning solution, it may not get rid of all the limescale buildup in your machine.

It’s essential always to follow manufacturer’s instructions on how much water and cleaning agent ratio for proper mixing when using commercial cleaners or vinegar solutions.

Not Rinsing Properly

After running the descaling solution through your coffee maker, it’s crucial to rinse everything thoroughly with clean water. Failing to do so can leave behind traces of vinegar or cleaning solution in your appliance that could affect its performance over time.

Ensure that you rinse every part from reservoirs and portafilters down through into piping systems until no more traces left before using again.

Neglecting Internal Components

Most people tend only to focus on visible parts like reservoirs and portafilters during cleaning while neglecting internal components like heating elements and tubing systems where most limescale buildup occurs. It is important also to ensure these parts receive equal attention when performing maintenance procedures like deep cleanings.

Using Alternative Cleaning Agents

Using alternative solutions other than those recommended by manufacturers can cause severe damage not only leading up faults but also void warranties! The use of acidic liquids such as lemon juice or even citric acid crystals may seem like an economical option but end up causing more harm than good. Always, stick to the recommended cleaners.

Rushing The Descaling Process

Descaling your Breville coffee machine takes time and requires patience. Rushing through the process can lead to incomplete cleaning or damage to your appliance.

It’s important that you don’t rush through any steps by ensuring enough time is given between every step, especially after adding cleaning agents like vinegar or commercial solutions.

Not Following Manufacturer Instructions

Lastly but most importantly, ignoring manufacturer instructions when descaling your Breville coffee machine could result in severe damage even leading up to permanent malfunction of parts or reduced efficiency. Always refer back to the manual before starting any maintenance procedures such as descaling as this will help avoid costly mistakes and ensure everything is done right.## FAQs

What is descaling and why is it important for a Breville coffee machine?

Descaling is the process of removing mineral deposits or limescale buildup from the internal components of a Breville coffee machine. Over time, tap water can leave minerals in the machine, affecting the taste quality and brewing performance. Descaling ensures that the coffee machine operates efficiently, prolonging its lifespan, and maintaining the quality and consistency of coffee.

How often should I descale my Breville coffee machine?

The frequency at which you should descale your Breville coffee machine depends on factors such as the hardness of the water, the frequency of use, and the manufacturer’s recommendations. It’s generally recommended that you descale your coffee machine every three to six months. However, if you have hard water or use your machine several times a day, descaling may be necessary more frequently.

How do I descale my Breville coffee machine?

To descale your Breville coffee machine, you need a descaling solution, water, and a container. First, empty and clean the water tank of your machine, then prepare the descaling solution as instructed on the package. Next, fill the water tank with the descaling solution and run a brewing cycle. Discard the descaling solution and run a few brewing cycles with fresh water to rinse the machine. Finally, wipe the machine’s exterior with a clean, damp cloth.

Can I use vinegar to descale my Breville coffee machine?

Using vinegar to descale your Breville coffee machine is not recommended. Vinegar contains acetic acid, which can corrode the metal and rubber components of the machine, leading to potential damage and a shorter lifespan. Instead, use a descaling solution specially designed for coffee machines. Many manufacturers, including Breville, offer their descaling solutions for their machines.

Jessica Hartley

Share this


How to Make Ginger and Cinnamon Tea

Ginger and cinnamon tea is a delicious and healthy beverage that is easy to prepare and can be enjoyed any time of day. This...

Is Natural Bliss Coffee Creamer Healthy?

<img src="" alt="image for is Natural Bliss coffee creamer healthy" style="width:100%;"> Coffee can be a morning ritual for many individuals. Whether you brew it at...

Do You Refrigerate Dump Cake?

Dump cake is a beloved dessert in many households due to its simplicity and versatility in flavor. However, one question that often arises when...

Recent articles

More like this


Please enter your comment!
Please enter your name here